9990
Alkyd Paint
Single component alkyd enamel paint, high gloss. For use above the waterline on steel, wood and fibreglass. For both outdoor and indoor environments. Recoatable after 48 hours at + 10 °C. Maximum time for recoating 6 days at + 10 °C and 3 days at + 20 °C. If the maximum time is exceeded, the surface exterior must be matte sanded before a new layer can be applied. Consumption: 11.5m2/litre. Contains 0.75 L.
Instructions for use Apply the paint with a brush, roller or pad. Stir well before use. The surface must be completely dry and clean. The outdoor temperature must not be lower than +5 degrees. Do not paint in bright sunlight, on hot surfaces or in humid conditions. Ensure the area is well-ventilated. Apply 2-3 layers of paint. The amount of thinner required depends on the temperature, ventilation and surface. Use thinner produced for single component alkyd enamel. The brushes should be cleaned with thinner/white spirits.
Instructions for use Apply the paint with a brush, roller or pad. Stir well before use. The surface must be completely dry and clean. The outdoor temperature must not be lower than +5 degrees. Do not paint in bright sunlight, on hot surfaces or in humid conditions. Ensure the area is well-ventilated. Apply 2-3 layers of paint. The amount of thinner required depends on the temperature, ventilation and surface. Use thinner produced for single component alkyd enamel. The brushes should be cleaned with thinner/white spirits.
