105,-
2100,- / L
Gas/Oil Sealing
Art. 36-41
Pay & Collect
Submit your order now and collect your items at your local Biltema store in 2 hours!
This is how Pay & Collect work
Thread sealant for metal connections. Works equally well on HVAC connections as it does for gas and oil installations. Seals without clogging valves or pressure gauges. In practical tube for easy application. Temperature range -50 °C to +150 °C. Suitable for use in connections up to 75 mm. Does not crack or contract. Very high resistance to vibrations and impacts. Hardens in less than 15 minutes. 50 ml.
Instructions *Ensure that all parts are clean, dry and free of oil and grease. A better result is achieved with degreased parts. *Fill the connection with sealant by hand, directly from the tube. *Assemble the parts. *Wipe up any excess sealant that may have seeped out. The thread sealant hardens in the absence of oxygen. *Allow the thread sealant to solidify for about 15-30 minutes, depending on the amount used.
NOTE! An activator/primer can be used, but this may reduce the overall strength by 30%.
Instructions *Ensure that all parts are clean, dry and free of oil and grease. A better result is achieved with degreased parts. *Fill the connection with sealant by hand, directly from the tube. *Assemble the parts. *Wipe up any excess sealant that may have seeped out. The thread sealant hardens in the absence of oxygen. *Allow the thread sealant to solidify for about 15-30 minutes, depending on the amount used.
NOTE! An activator/primer can be used, but this may reduce the overall strength by 30%.