9990
Winter Work Gloves for touchscreens 542
Art. 38-2846
Pay & Collect
Submit your order now and collect your items at Biltema {0} in 2 hours!
Read more about Pay & Collect
Use your mobile while wearing your winter gloves. Warm-lined with Thinsulate®. Elastic spandex with durable PU palm. Touchscreen friendly material on the thumb, forefinger and middle finger. Open cuffs. Elasticised wrists. EN 388 and EN 511.
Technical data:
This product is CE marked in accordance with the directive on personal protective equipment, 89/686/EEC. It conforms to the directive's requirements for innocuousness, comfort and efficacy.
Certification: This product has been constructed and manufactured in accordance with the following standards:
EN 388:2003 – Protective gloves against mechanical risks.
These gloves comply with EN 388, with a performance level according to the table.
a) Number of sander rotations.
b) Resistance to rotating blades (index).
c) Test example torn in opposite directions (Newton).
d) Pressure applied to test example with sharp awl (Newton).
EN 511:2006 – Protective gloves against cold.
These gloves conform to the requirements for contact cold in accordance with EN 511:2006, with a performance level according to the table (X= property not tested).
Safety Information: The gloves protect against physical and mechanical stress, and against cold. The protection levels are applicable to the palm of a new, unwashed and non-modified glove. Tested in accordance with the relevant standards. The gloves must not:
Technical data:
- Material, back: Spandex
- Material, palm: PU Material, lining: 3M Thinsulate® C40
- Material, elastic: Polyester
This product is CE marked in accordance with the directive on personal protective equipment, 89/686/EEC. It conforms to the directive's requirements for innocuousness, comfort and efficacy.
Certification: This product has been constructed and manufactured in accordance with the following standards:
- EN 420:2003+A1:2009 – General requirements for protective gloves.
- EN 388:2003 – Protective gloves against mechanical risks.
- EN 511:2006 – Protective gloves against cold.
- The product complies with the restriction rules in Annex XVII of the European REACH regulations.
EN 388:2003 – Protective gloves against mechanical risks.
These gloves comply with EN 388, with a performance level according to the table.
| Tested property | Level, gloves | Max. level |
|---|---|---|
| Abrasion resistance a) | 1 | 4 |
| Cut resistance b) | 1 | 5 |
| Tear resistance c) | 1 | 4 |
| Puncture resistance d) | 1 | 4 |
| Protection level | 1 | 2 | 3 | 4 | 5 |
|---|---|---|---|---|---|
| Abrasion resistance a) | 100 | 500 | 2000 | 8000 | - |
| Cut resistance b) | 1,2 | 2,5 | 5,0 | 10,0 | 20,0 |
| Tear resistance c) | 10 | 25 | 50 | 75 | - |
| Puncture resistance d) | 20 | 60 | 100 | 150 | - |
b) Resistance to rotating blades (index).
c) Test example torn in opposite directions (Newton).
d) Pressure applied to test example with sharp awl (Newton).
EN 511:2006 – Protective gloves against cold.
These gloves conform to the requirements for contact cold in accordance with EN 511:2006, with a performance level according to the table (X= property not tested).
| Tested property | Level, gloves | Max. level |
|---|---|---|
| Convection cold | 0 | 4 |
| Contact cold | 1 | 4 |
| Water penetration | 0 | 1 |
| Protection level | 0 | 1 | 2 | 3 | 4 |
|---|---|---|---|---|---|
| Convection cold (I) | I ≤ 0.10 | 0.10 ≤ I | 0.15 ≤ I | 0.22 ≤ I | 0.30 ≤ I |
| Contact cold (R) | R ≤ 0.025 | 0.025 ≤ R | 0.050 ≤ R | 0.100 ≤ R | 0.150 ≤ R |
| Water penetration | Penetration | No penetration |
Safety Information: The gloves protect against physical and mechanical stress, and against cold. The protection levels are applicable to the palm of a new, unwashed and non-modified glove. Tested in accordance with the relevant standards. The gloves must not:
- Come into contact with fire.
- Be used when there is a risk o
